Liebherr LH 80 C Litronic - Manual (Page 21)

JJ
LL
K K
L0056
FF
C C
D D
L max. L max.
H H
II
M M
Q Q
F max. F max.
N N
AA
PP
B B
G G EE
Z
L0056 L0056 L0056
L0056
21 Special timber handling machines from Liebherr
Dimensions
Rotating Grapple, 360° 3.2 m² 3.6 m² 3.8 m² 3.2 m² 3.6 m²
A Max. manipulation height with grapple closed mm 5,909 5,801 5,719 5,688 5,570
B Max. manipulation height with grapple open mm 6,354 6,304 6,266 6,244 6,192
C Manipulation height at max. outreach mm 2,409 2,301 2,219 2,188 2,070
D Lower manipulation area mm 824 932 1,014 1,045 1,163
E Max. height mm 9,120 9,120 9,120 9,120 9,120
F Outreach at max. lift height mm 2,675 2,675 2,675 2,675 2,675
F max. Max. outreach mm 3,970 3,970 3,970 3,970 3,970
G Height of grapple link mm 8,650 8,650 8,650 8,650 8,650
H Height above cab mm 3,590 3,590 3,590 3,590 3,590
I Height with grapple positioned longitudinally mm 5,050 5,050 5,050 5,050 5,050
Height when max. outreach is attained mm 6,730 6,730 6,730 6,730 6,730
J Ground clearance mm 580 580 580 580 580
K Wheelbase mm 3,700 3,700 3,700 3,700 3,700
L Overall length mm 10,207 10,290 10,304 10,125 10,197
L max. Max. Total length at max. outreach mm 12,559 12,642 12,656 12,477 12,549
Width over tyres mm 3,220 3,220 3,220 3,220 3,220
M Grapple opening mm 3,846 4,038 4,183 4,237 4,448
N Max. span with grapple open mm 4,403 4,622 4,771 4,300 4,517
P Height from top to top mm 2,741 2,849 2,931 2,962 3,080
Q Grapple cross-section mm 2,465 2,647 2,679 2,377 2,522
Grapple weight kg 2,328 2,349 2,336 2,384 2,442
Z Jaw width mm 1,000 1,000 870 1,000 870
Turning circle over lifting equipment with grapple positioned longitudinally mm 6,830 6,900 6,950 6,830 6,900
Turning circle over external edge of tyres mm 6,725 6,725 6,725 6,725 6,725
Turning circle over inner edge of tyres mm 3,500 3,500 3,500 3,500 3,500
Max. payload with 40° angle of articulation * kg 8,650** 8,625** 8,635** 8,590** 8,350**
Max. payload with 37° angle of articulation * kg 8,800** 8,780** 8,790** 8,650** 8,490**
Operating weight * kg 33,450** 33,470** 33,450** 33,650** 33,850**
Tyre sizes 775/65R29 775/65R29 775/65R29 775/65R29 775/65R29
Goodyear Goodyear Goodyear Goodyear Goodyear
GP-4D GP-4D GP-4D GP-4D GP-4D
* The figures shown here are valid with tyres above, includes all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tyres
and optional equipment as well as chains or tie-down devices will change the operating weight and payload. The stump pusher encreases the
operating weight at 860 kg.
** Data with rear tyres filled with water
Combination grapple; closes tip to tip
Heart-shaped grab with chain as stump holder; closes tip on tip