The right tooth for every appl ication – Liebherr Face shovel User Manual
Page 10

10
The right tooth
for every appl ication
The economic use of a hydraulic excavator is only possible if the tooth shape
matches the relating application. Liebherr offers a broad tooth program with tooth
shapes for every task.
Due to its low overall heigth and the slim, self-sharpening tooth shape the
Liebherr U-system stands for best diggning behavior at lowest penetration
resistance. Highly wear-resistant steel provides familiar reliability under hard
conditions, which has already stood the test on wheel loaders. The lateral rolled pin
fastening allows a simple and safe change of teeth.
Pointed tooth
HD-tooth
Standard tooth
Features:
Pointed tooth for good penetration, reversible.
Application:
for very hard and frozen soil, non-friable rock
(limestone, shale, brown coal, mining of wall
gravel etc.).
Features:
Cap with high share of material for long service
life in wear-intensive applications.
Application:
for extremely abrasive soils (granite, basalt,
sandstone, rocks with high share of silica etc.).
Features:
symetric caps with cut-out at the front, self
sharpening, reversible.
Application:
for friable and medium-weight friable soils
(loamy sand, gravel, soft brown coal, soft/
medium clay etc.).
Liebherr Uni tooth system:
A 910 Compact (A 309) - A 918 (A 900) / R 918 - R 920
(technical data on page 42)