Introduction – Belkin F1DZ104T User Manual

Page 4

Text mode
Original mode

Introduction

This sheet will guide you through the basic steps needed to install the
OmniView SE Plus Series KVM Switch (the Switch). If you have any problems
during installation, please refer to the SE Plus Series User Manual.

The following items are needed to install the SE Plus:

• OmniView SE Plus Series KVM Switch

• One (each) PS/2 keyboard, monitor, and mouse

• One KVM cable per computer installed

• One 12V DC, 1A power supply unit

Recommended Cable Kits:

F3X1105-XX

PS/2 Style

F3X1835-XX-GLD

PS/2 Style

F3X1962-XX

USB Style

F3X1895-XX-GLD

USB Style

F1D108-CBL

Daisy-Chain Cable

(-XX denotes the length in feet)

P74183ea_F1DZ102-104_QIG.qxd 16-04-2003 10:01 Page 2

This manual is related to the following products:

F1DZ102T