Brinkmann 7341 - Manual (Page 25)

Step 5
Install the wheels as illustrated, by
inserting the wheel axle bolts
through the wheels, washers and
right side panel axle holes. Tighten
axle bolts securely using hex nut
wrench provided in parts pack.
Step 6
Snap wheel hubcaps onto the
outside of wheels as illustrated.
Note: With the help of a friend, turn
the cart to its upright position.
Try to minimize the stress to
the legs.
Step 7
Attach the door bracket to the front
legs of the cart frame assembly
using four M6 X 12mm bolts (silver)
and star washers (silver).
Step 8
To attach the door handle to the
door, insert two M6 x 12mm bolts
(silver) halfway onto the door
handle. Align the bolts to the
keyholes which are located on the
door panel, and slide down. Then
tighten the two bolts securely.
Repeat for other door.
24
Leg
Wheel
Washer
Wheel axle
bolt
Hubcap