Philips EnergyUp Lampe Energylight - Manual (Page 15)

- For the best results, place the appliance at the same level as your
midriff (stomach area), e.g. place it on the table at which you are
sitting.
Note: Do not stare into the light of the appliance. It is sufficient that the blue
light reaches your eyes indirectly.
- Use the appliance in a well-lit room to minimise eyestrain.
2 Press the on/off button briefly to switch on the appliance (Fig. 6).
, The first time you switch on the appliance, the blue light comes on
at the default middle setting.
, The next time you switch on the appliance, the light comes on at
the last used setting. You can choose five settings.
3 To choose a lower or higher setting, touch the + or - button briefly
to arrive at a light intensity that is comfortable to you (Fig. 7).
, The timer starts to count up to 1 hour. The first segment of the
time indicator bar flashes (Fig. 8).
, After 10 minutes, the first segment lights up solid and the second
segment starts flashing (Fig. 9).
, After 10 more minutes, the second segment lights up solid and the
third segment starts flashing.
, This process continues, until all segments of the time indicator bar
light up solid after 1 hour.
Note: If you want to switch off the appliance, press the on/off button briefly.
4 If you use the appliance on its rechargeable battery, the charge
indicator lights up solid orange after about 1 hour to let you know
that the rechargeable battery is low. Connect the appliance to the
mains to charge the rechargeable battery (Fig. 10).
Note: You can use the appliance while it is charging.
5 If the battery is low and the appliance is not connected to the
mains, the battery symbol starts flashing orange after some
time (Fig. 11).
6 If you do not connect the appliance to the mains, the appliance
switches off.
ENGLISH 15