Beko WMD 78144 - Manual (Page 34)

EN 34
Machine does work. Nothing is displayed on the screen.
The plug might not be plugged in the
mains outlet.
Fuse may have blown.
Electricity may be cut off.
The “On/Off” button might have not
been pressed.
Check the plug.
Check the fuse.
Check the supply power.
Press this button.
The machine did not start after the program was selected and the «Start/Pause/Cancel»
button was pressed.
The front door may be ajar.
The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the
model of your machine, water cut-off symbol may light up too)
Water may have been cut off.
You can restart your machine by pressing the
«Start/Pause/Cancel» button for a short time after
ensuring that the water is not cut off.