Beko WMD 78144 - Manual (Page 22)

EN 22
Main wash
Main wash symbol will light up to
indicate that the main wash cycle has
started.
Rinse
Rinse symbol lights up at the beginning
of the rinse step.
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during “Spin” and
“Pump” special programs.
• If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to
an excessive unbalanced distribution
of laundry in the machine.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
When the “Program selection” button is
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine to
standby mode
The machine is switched to standby
mode by pressing “Start/Pause/Cancel”
button (Figure 2-10) momentarily. The
Standby symbol (Figure 3-13k) which
indicates the machine is in standby
mode lights up and the start symbol
(Figure 3-13j) that shows the program
has started and is still continuing fades
out.
Selecting or canceling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water
level is suitable. The door locked symbol
(Figure 3-13i) will light up until the door
is suitable for opening. This symbol will
fade out as soon as the door is allowed
to open. Laundry may be added / taken
out by opening the door.
Door lock
The Door Locked Symbol (Figure 3-13i)
lights up when the loading door is
locked. This symbol will flash until the
door is allowed to open. Do not force
the door at this stage. This symbol will
fade out as soon as the door is allowed
to open. You may open the door after
the symbol fades out.
Child-proof lock
Protect the appliance from being
tampered by children by means of the
child-proof lock. In this case, no change
can be made in the running program.
C Your machine can be turned on
and off with On/Off button while
the child-proof lock is activated. In
this case, your machine will resume
its program with child-proof lock
activated.
The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functions for 3 sec. “C:on” (Child-proof
lock is activated) label appears on the
display.
The same symbol will also be displayed
whenever any button is pressed while
the machine is child-locked.
To deactivate the child-proof lock,
press the 2nd and 4th auxiliary function