Philips Élégante microchaîne - Manual (Page 15)

16
[
» PROG] (program) is displayed.
3
Press / to allocate a number to this
radio station, then press PROG/CLOCK
SET
WRFRQÀUP
4
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store ‡
another station in its place.
Select a preset radio station
1
In tuner mode, press / to select a
preset number.
You can also press the numeric buttons
‡
to select a preset number directly.
Tip
Position the antenna as far as possible from ‡
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
‡
the position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Display RDS information
1
For an FM station with RDS, press
RDS/DISPLAY repeatedly to display
various broadcast information.
5 Listen to radio
Tune to a radio station
1
Press TUNER to select FM.
2
Press and hold / for more than 2
seconds.
[
» SEARCH] (search) is displayed.
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press ‡
/ UHSHDWHGO\XQWLO\RXÀQGRSWLPDO
reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1
In the tuner mode, press and hold
PROG/CLOCK SET for more than 2
seconds to activate automatic program
mode.
[
» AUTO] (auto) is displayed.
All available stations are programmed
»
in the order of waveband reception
strength.
7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV »
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
EN