Philips Élégante microchaîne - Manual (Page 11)

12
Note
If you are not going to use the remote control ‡
for a long time, remove the batteries.
Do not use old and new or different types of
‡
batteries in combination.
Batteries contain chemical substances, so they
‡
should be disposed of properly.
Connect power
Caution
Risk of product damage! Ensure that the power ‡
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
‡
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adaptor, ensure you
‡
have completed all other connections.
1
Connect the power adaptor to:
3
1
2
3 Get started
Caution
Use of controls or adjustments or ‡
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Placement
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from ‡
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
EN