Philips Élégante microchaîne - Manual (Page 12)

13
7
Press PROG/CLOCK SET WRFRQÀUPWKH
clock setting.
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press again to switch the unit to
standby mode.
The clock (if set) appears on the
»
display panel.
To switch the unit to Eco Power Standby
mode:
1
Press and hold for more than 2
seconds.
The backlight on the display panel
»
turns off.
Tip
The unit switches to Eco Power Standby mode ‡
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1
Press and hold for more than 2
seconds.
the ‡ DC IN jack on the main unit.
the wall outlet. ‡
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[
» AUTO INSTALL PRESS -- PLAY
KEY](auto install press -- play key) is
displayed.
2
Press on the main unit to start
installation.
The unit automatically stores radio
»
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
When all the available radio stations
»
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
Set clock
Note
You can set the clock in the standby mode ‡
only.
1
Press and hold PROG/CLOCK SET to
enter the clock setting mode.
[
» SET CLOCK](set clock) scrolls on the
screen.
2
Press / repeatedly to select 12 hour
or 24 hour format.
3
Press PROG/CLOCK SET WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
4
Press / to set the hour.
5
Press PROG/CLOCK SET WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
6
Press / to set the minute.
English
EN