Philips Sonicare CleanCare Brosse à dents sonique rechargeable - Manual (Page 15)

3 Remove the screwdriver and apply the above
instruction to the other slot, which is located
on the opposite side of the handle. Twist the
blade to split the rest of the housing.
4 Now insert the screwdriver into the middle
slot, which is located on the top front part of
the handle, as shown. Push the blade in as far as
it goes.
5 Now use the screwdriver as a lever to pry the
2 handle sections apart.
6 Pull the 2 handle sections completely apart.
7 Insert the screwdriver underneath the
electronic circuit board in multiple places.
EngliSh 15