Philips Sonicare CleanCare Brosse à dents sonique rechargeable User Manual
Page 11
To deactivate or activate the Easy-start feature:
1
Attach the brush head to the handle.
2
Place the handle in the plugged-in charger.
3
To deactivate the Easy-start feature, press and
hold the on/off button for 5 seconds. You hear
1 beep to indicate that the Easy-start feature
has been deactivated.
4
To activate the Easy-start feature, press and
hold the on/off button for 5 seconds. You hear
2 beeps to indicate that the Easy-start feature
has been activated.
Use of the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
the effectiveness of the Sonicare toothbrush in
removing plaque.
Make sure the Easy-start feature is deactivated and
the handle fully charged when the Sonicare is used
in clinical trials.
Smartimer
- The Smartimer automatically sets the brushing
time to the 2 minutes that dentists and dental
hygienists recommend.
- After 2 minutes, the Smartimer automatically
switches off the toothbrush.
- If you want to stop brushing briefly during a
2-minute brushing cycle, press the on/off button.
When you press the on/off button again, the
Smartimer resumes the brushing cycle at the
point where you stopped.
- The Smartimer automatically resets to the
beginning of a 2-minute cycle if:
1 you stop brushing for 30 seconds or longer;
2 you put the handle in the charger.
EngliSh
11