BT PaperJet 40 - Manual (Page 25)

25
BT PaperJet 40 UG – Issue 2 – Edition 2 – 18.03.04 – 6026
4. The document will stay in the document feeder until it is polled.
To cancel the poll remove the document.
Timer mode
If you want, you can set different modes for day and night , e.g.
change the number of rings before fax calls are answered.
At night pre-set to 10pm-6am, faxes will be received without ringing
and telephone calls will have a quiet ring.
If the day/night timer is switched off, your BT PaperJet 40 will operate
according to the day
settings at all times.
Switch day/night timer on/off
1. Press and hold for two seconds to switch the day/night mode on
and off. When is displayed, the day/night mode is switched on.
Change day and night periods
Night time is pre-set to 10pm-6am, but you can change these times
to suit your preferences.
1. Press , then .
2. Enter the time you want your machine to begin the daytime settings,
e.g. 0800 for 8am. Press to confirm.
3. Enter the time you want your machine to begin the night time
settings, e.g. 2330 for 11.30pm. Press to confirm.
Change day/night settings
You can adjust:
the maximum number of rings you will hear when you receive a call: 0-7.
Faxing