System setup: advanced menu – BenQ MP511 User Manual
Page 46
Operation
46
System setup: Advanced menu
Auto Power
Off
(Disable)
This function allows the projector to turn off automatically if no input
signal is detected after a set period of time. Press
Left/
Right on the
projector or remote control to set the duration before the projector is
turned off.
The time period can be set from 5 to 30 minutes in 5-minute increments.
If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time
period.
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
for details.
Timer
Controller
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Panel Key
Lock
(Disable)
Disables or enables all panel key functions except POWER on the
projector and buttons on the remote control. See
for details.
Splash
Screen
(BenQ logo)
Allows you to select which logo screen will display during projector start-
up. Three options are available: BenQ logo, Black screen, or Blue screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Quick
Cooling
(On)
Enables or disables the Quick Cooling function. Selecting On enables the
function and projector cooling time will be shortened from a normal 120-
second duration to approximately 30 seconds.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas.
See
"Operating in a high altitude environment" on page 37
for details.
Menu
Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last button
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.