Philips Lumea Épilateur à lumière intense pulsée - Manual (Page 25)

, The ‘ready to flash’ light on the back of the
appliance lights up green when all contact
switches of the safety ring are in contact with
the skin and the appliance is charged.
Note: The safety ring has contact switches that together
are the safety system of the appliance. This safety ring
prevents unintentional flashing without skin contact.
Tip: For easier use, stretch the skin you want to treat.
On areas with softer skin, you may need to exert more
pressure on the appliance to push in all contact switches.
Note: Bony areas like shinbone, ankles or ribs are more
sensitive than other areas of the body. When you press
the appliance hard onto these areas, the skin can be
more susceptible to skin reactions like irritation and
redness. See section ‘Possible side effects and skin
reactions’ in this chapter. Press the appliance onto the
skin just hard enough to make the ‘ready to flash’
light go on, but no harder.
7 Press the flash button to release a flash.
Now you have 2 options to release the next flash:
A Keep the flash button pressed. The appliance
releases one flash after another as long as
the safety ring is in full contact with the skin.
Immediately after the appliance has flashed,
slide the appliance to the next area. Make sure
the safety ring is fully pressed onto the skin.
This ‘Slide & Flash mode’ is especially convenient for
treatment of larger areas like the legs.
English 25