Philips Robust Collection Batteur - Manual (Page 7)

EnglisH 7
safety system switches off the appliance. Switch off and unplug the
appliance. Let the appliance cool down for 30 minutes before you continue
to use it.
using the appliance
1 Insert the beaters or kneading hooks into the mixer (‘click’). You may
need to turn them slightly while you do this (Fig. 2).
Note: Insert the kneading hook or the beater with the collar into the larger
opening in the bottom of the mixer.
2 Put the plug in the wall socket.
Note: Always check if the speed selector is in 0 position before you plug in the
mixer.
3 Put the ingredients in a bowl.
See the table below for the recommended quantities and processing times.
Quantities and processing times
Kneading hooks* Quantity (max.) Time (max.)
Yeast dough 500g flour 3 minutes
*) Select Turbo
Beaters* Quantity (max.) Time (max.)
Batters for waffles,
pancakes, etc.
750g 3 minutes
Thin sauces, creams and
soups
750g 3 minutes
Mayonnaise 3 egg yolks 15 minutes
Pureeing potatoes 750g 3 minutes
Whipping cream 500g 3 minutes
Beaters* Quantity (max.) Time (max.)
Whisking egg whites 5 egg whites 3 minutes
Cake mixture 750g 3 minutes
*) Start mixing at a low speed to avoid splashing. Slowly increase the speed
later.
4 Lower the beaters or kneading hooks into the ingredients.
5 Set the speed control to the desired speed to switch on the
appliance (Fig. 3).
- You can use the turbo setting to mix more quickly or to increase the
speed during heavy jobs, e.g. kneading yeast dough.
- If you want to stop mixing for a while, set the speed control to ‘0’ to
switch off the mixer. Then put the mixer (with the beaters or kneading
hooks still attached) on its heel until you continue.
- It is recommended to use the turbo speed for mixing sponge cake and
egg white.
6 When you have finished mixing, set the speed control to ‘0’ and unplug
the appliance.
7 Pull up the eject lever to eject the beaters or kneading hooks (Fig. 4).
cleaning
Always unplug the appliance before you clean it.
Never immerse the motor unit in water or rinse it under the tap.
1 Clean the beaters and kneading hooks in warm water with some
washing-up liquid or in the dishwasher.
2 Clean the motor unit with a moist cloth.
storage
1 Wind the cord round the heel of the appliance. (Fig. 5)
2 Fix the cord with the cord clip