Picture menu – BenQ MP723 User Manual
Page 49
Operation
49
PICTURE menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Picture Mode
(PC/DVI-A/DVI-
D: Dynamic;
YPbPr/ S-Video/
Video:
Standard)
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
for details.
Reference
Mode
Selects an picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the same
page below. See
"Setting the User 1/User 2 mode" on page 36
for details.
Brightness
Adjusts the brightness of the image. See
"Adjusting Brightness" on page 36
for details.
Contrast
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 36
for details.
Color
(0)
Adjusts the color saturation level -- the amount of each color in a video
image. See
for details.
Tint
(0)
Adjusts the red and green color tones of the image. See
for details.
Sharpness
(15)
Adjusts the image to make it look sharper or softer. See
for details.
Brilliant
Color
(On)
See
"Adjusting Brilliant Color" on page 37
for details.
Color
Temperature
(T3)
There are four color temperature settings are available. See
for details.
3D Color
Management
See
"3D Color Management" on page 38
for details.
Save
Settings
Saves the settings made for User 1 or User 2 mode.