Controls and functions, Projector – BenQ MP723 User Manual
Page 10
Introduction
10
Controls and functions
Projector
1.
Focus ring
Adjusts the focus of the projected image.
See
"Fine-tuning the image size and clarity"
for details.
2.
Zoom ring
Adjusts the size of the image. See
tuning the image size and clarity" on page
32
for details.
3.
TEMPerature warning light
Lights up red if the projector's temperature
becomes too high. See
for details.
4.
POWER indicator light
Lights up or flashes when the projector is
under operation. See
for details.
5.
Power
Toggles the projector on or off.
See
"Starting up the projector" on page 26
and
"Shutting down the projector" on page
for details.
6.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
for details.
7.
Left/
Starts the FAQ function. See
for details.
8.
BLANK
Used to hide the screen image. See
for details.
9.
LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See
for
details.
10.
Keystone/Arrow buttons (
/ Up,
/
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 33
for
details.
11.
AUTO
Automatically determines the best picture
timings for the displayed image. See
adjusting the image" on page 32
for details.
12.
Right/
Activates panel key lock. See
for details.
When the On-Screen Display (OSD) menu
is activated, the #7, #10, and #12 buttons
are used as directional arrows to select the
desired menu items and to make
adjustments. See
for details.
13.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 31
for
details.
14.
Mode/enter
Selects an available picture setup mode. See
"Selecting a picture mode" on page 35
for
details.
Enacts the selected On-Screen Display
(OSD) menu item.
See
for details.
I
I