Philips Friteuse - Manual (Page 7)

Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Preparing for use
1 Clean the appliance before first use (see chapter ‘Cleaning’).
Press the release button to open the lid. The lid opens automatically (Fig. 2).
Consult the oil/fat table to determine how much oil or fat you have to put in the
fryer (Fig. 3).
Fill the fryer with oil, liquid fat or melted solid fat to a level between the ‘MIN’ and ‘MAX’
indications and close the lid. (Fig. 4)
Do not switch on the appliance before you have filled it with oil or fat.
oil and fat
Never mix different types of oil or fat and never add fresh oil or fat to used oil or fat.
We advise you to use frying oil or liquid frying fat. Preferably use vegetable oil or fat that is rich in
unsaturated fats (e.g. linoleic acid), such as soy oil, peanut oil, maize oil or sunflower oil.
Because oil and fat lose their favourable properties rather quickly, you have to change the oil or fat
regularly (after 10-12 times).
Always change the oil or fat if it starts foaming when it is heated, if it has a strong smell or taste or if
it turns dark and/or syrupy.
solid fat
You can also use solid frying fat. In that case, extra precautions are necessary to prevent the fat from
spattering and the heating element from overheating or becoming damaged.
1 If you want to use new blocks of fat, melt them slowly over a low heat in a normal pan.
Pour the melted fat carefully into the fryer.
Store the fryer with the resolidified fat still in it at room temperature.
If the fat gets very cold, it may start spattering when it melts. Punch some holes in the
resolidified fat with a fork to prevent this (Fig. 5).
Be careful not to damage the inner bowl with the fork.
using the appliance
Frying
Hot steam escapes from the filter in the lid during frying.
1 Take the entire cord from the cord storage compartment and put the plug in the wall
socket (Fig. 6).
Press the on/off switch to switch on the fryer.
The power-on light in the on/off switch and the temperature light go on.
Set the temperature control to the required temperature. (Fig. 7)
For the required temperature, see the package of the food to be fried or chapter ‘Quantities,
temperatures and frying times’.
,
EnglisH 7