Specifications – B&K AVP 2030 User Manual
Page 36
Page 34
Specifications
Audio Specifications
Frequency Response (+3 dB):
5 Hz - 150 kHz
Line Level Sensitivity:
63 mV
Maximum Output Level:
9 V R.M.S.
Total Harmonic Distortion:
Less than .02%
Unprocessed
Less than .05%
Front
Less than .12%
Rear
Less than .05%
Subwoofer
Signal to Noise Ratio:
89 dB, CCIR 2k Weighted, max level
Input Impedance:
50k Ohms
Output Impedance:
221 Ohms
Noise Test Reference Level:
-12.5 dB
Surround Outputs non-inverting
6
Audio Analog Inputs
7
Non-inverting audio outputs
Zone 1 Audio Outputs (extra L & R)
2 sets
Zone 2 Audio Outputs
2 sets
Video Specifications
Frequency Response (-3,-3 dB):
20 Hz - 10 MHz
Buffered Input Impedance:
75 Ohms
Buffered Output Impedance:
75 Ohms
Maximum Input Level:
2 V R.M.S.
Maximum Output Level:
2 V. R.M.S.
Composite Video Inputs/Outputs
4 / 4
S-Video Inputs/Outputs
3 / 3
Digital Coax Inputs
6
Line Voltage
120/220/240 VAC switchable
Replacement fuse
Line fuse - 0.5 A / 250 V fast blow
Shipping weight
20 lb
Dimensions
width
17 inches
height 3¾ inches
depth
12 inches
Care and cleaning
Under normal use, the preamplifier will not require any special care. Over time you may
wish to clean the exterior of the unit by wiping it with a damp cloth to remove any dirt or
dust that accumulates on it. Do not let any liquid enter the preamplifier thru the vents in
the top cover.
You may clean the connectors on the back panel with isopropal alcohol annually.