B&K AVP 2030 - Manual (Page 10)

Page 8
Rear panel view
The AVP back panel is organized into groups of inputs and outputs for audio and video
as shown below.
1. Power switch 9. Tape loop
2. AC fuse holder 10. V1 loop
3. AC input receptacle 11. V2 loop
4. S-video inputs/outputs 12. CTRL OUT / IR IN jacks
5. Digital inputs 13. Surround outputs
6. Zone 1 preouts 14. Send/RCV jacks
7. Zone 2 preouts 15. Composite video inputs
8. Analog audio inputs 16. Composite video outputs
Rear panel description
1. Power switch -
For switching AC power to the AVP preamplifier. Off = O, On = I. The
rocker must be in the on (I) position for the preamplifier to operate.
2. AC fuse holder -
Holds the AC Line fuse. Replace only with 0.5 A (½ A) 250 V fast blow
fuse.
3. AC input receptacle -
For attaching the supplied AC power cord to the preamplifier.