Blaupunkt FRANKFURT RCM 82 - Manual (Page 12)

Frankfurt RCM 82
28
Stopping Fast Forward Operation
● Press button FR.
Fast Rewind Operation
● Press button FR < .
On the display G a e.g. the ‘<< >>’
symbols illuminates to indicate fast tape
operation. Once fast rewinding is finis-
hed, the same side will start to play
automatically.
Stopping Fast Rewind Operation
● Press button FF.
Radio Reception during FF or FR
Operation
During cassette operation, the radio section
is off. However, you are free to choose if you
want to listen to the radio while the tape is
forwarded or rewound:
● Press the RM button ? .
When the function is on, ‘RM’ lights up
on the display
G m.
Autoreverse
(Changing the Tape Side)
If you want to change to the other side of the
cassette while listening to it:
● Press button : .
The display indication G a) changes
from (TR1-PLAY TR2-PLAY).
Once the end of the cassette is reached, the
set automatically switches to the other side.
Note:
When using stiff-going cassettes, the set
may switch over to the other side although
this is not desired. When this happens, check
the tape wound up so far; in these cases, fast
forwarding or rewinding it often helps.
Dolby-NR*
This set allows it to play cassettes which
have been recorded with Dolby-NR.
These cassettes distinguish by their reduced
background noise and improved dynamic
characteristics.
For switching Dolby-NR on or off:
● Press the button 8 .
If Dolby NR is on, ‘B’ illuminates on the
display
G g.
* Noise reduction system manufactured under license
from Dolby Laboratories. ‘DOLBY’ and the double-D sym-
bol are trademarks of Dolby Laboratories.
Tape Selection
To play METAL or CrO
2
cassettes
● press the MTL button 9 , “MTL” lights
up on the display G k.
Press this button once again to switch off this
function. “MTL” goes off in the display.
Changing the Audio Source with
SRC
You can shift between the connected audio
sources in the following order:
Cassette
♦ radio ♦ cassette
For switching to another audio source with
the cassette being inserted:
● Press the SRC button A .
The car radio shifts to radio operation.
Tape play is stopped; the audio head and the
pinch roller are released. By this, both the
cassette and the cassette mechanism are
protected (standby operation).
Skipping/Repeating Tracks with
CPS
Your car stereo is equipped with a Cassette
Program Search feature (CPS). This function
detects the beginning of the taped songs,
and it can be used to fast forward to the
beginning of the next one or to rewind to the
beginning of the current song.
Skipping a Track
For skipping a track,
● activate CPS using button @ , so that
“CPS” lights up on the display G .
● Press button FF > . On the display
G a “TR1 (or 2) - << >>” lights up; the
tape is fast forwarded.