Bosch DINIONXF LTC 0495 - Manual (Page 22)

Dinion XF | Installation Manual
Bosch Security Systems | 2004-01 | V1.0
EN | 22
Installer Settings
Install menu
Install lens wizard submenu
Adjustment procedure DC-iris Lens:
1. Unlock the back focus locking button.
2. Access the Lens Wizard menu.
3. SET BACK FOCUS NOW is highlighted in the menu.
4. Turn the back focus adjustment as required.
5. Lock the back focus locking button.
6. Exit the menu.
Function Selection Description
LENS
WIZARD Select submenu Select to optimize camera lens combination
I/O Select submenu Select to access the I/O functions
SYNC Select submenu Select to access the synchronization functions
CAMERA ID Select submenu Select to access ID menu
DEFAULTS Select submenu Return all settings for all modes to factory defaults
EXIT Exit the menu
Function Selection Description
LENS TYPE AUTO, MANUAL,
DCIRIS, VIDEO
In AUTO mode the camera auto detects the type
of lens used or force the camera into a mode.
DETECTED If the LENS TYPE detection is in AUTO, the
detected lens type will be shown.
SET BACK
FOCUS
NOW Select to force lens to its maximum opening. After
focusing the lens the object of interest remains in
focus in bright and low light conditions.
SET LVL (Video iris lenses only). The level detector
indicator must be set to the center by adjusting
the level potentiometer on the lens, to obtain the
best picture performance.
EXIT Return to the INSTALL menu
DinionXFD_Nv1_0.book Page 22 Friday, January 7, 2005 10:56 AM