Bosch DINIONXF LTC 0495 - Manual (Page 19)

Dinion XF | Installation Manual
Bosch Security Systems | 2004-01 | V1.0
EN | 19
Day/Night submenu
Enhance submenu
Function Selection Description
DAY/NIGHT COLOR,
MONO,
AUTO
• In COLOR mode the camera will always give a color image.
• In MONO mode the IR filter is removed, giving full IR
sensitivity in a monochrome image.
• In AUTO mode the camera switches the filter depending
on the scene illumination level.
LEVEL -15 - 0 - +15 To set the video level at which the camera switches to
monochrome operation in AUTO DAY/NIGHT mode.
PRIORITY COLOR,
MOTION In AUTO mode:
• COLOR: the camera gives a color image as long as the
light level permits.
• MOTION: the camera avoids motion blur as long as the
light level permits.
IR
CONTRAST NORMAL,
ENHANCED • In ENHANCED mode the camera will optimize contrast
in applications with high IR illumination levels.
• In NORMAL mode the camera will optimize contrast in
mono application with visible light illumination.
MONO
BURST ON, OFF • If selected OFF The Color Burst in the video signal is
switched OFF in monochrome mode of the camera.
• If selected ON the Color Burst remains active even in
Monochrome mode of the camera.
EXIT Return to Shutter/Gain submenu.
Function Selection Description
AUTO BLACK ON, OFF Autoblack ON automatically increases the
visibility of details
BLK LEVEL -50, ... 0, ...+50 Adjusts the black level between 0 and approx
110mV. Zero position of slider corresponds to the
factory default black level
CONTOUR -15 - 0 - +15 Adjusts the sharpness of the picture. 0
corresponds to the default position.
DNR (dynamic
noise reduction) AUTO, OFF In AUTO mode the camera automatically reduces
the noise in the picture. This may cause some
motion blur on moving objects.
XF-DYN (dynamic
range enhancement)
OFF, LOW,
MID, HIGH In XF-DYN mode the camera automatically
optimizes the contrast in the picture.
EXIT Return to Mode menu
DinionXFD_Nv1_0.book Page 19 Friday, January 7, 2005 10:56 AM