Glen Dimplex Home Appliances Ltd PBI60R - Manual (Page 20)

Installation Instructions
General information
Installation should only be carried out by a qualified
installer or engineer.
Please keep to the following points most carefully;
• The hob should not be fitted above a washing
machine, a fridge or a freezer.
• Wall surfaces above the work surface and in the
immediate vicinity of the cooking hob must be heat
resistant.
• Laminated surfaces and the adhesive used for fixing
them must be heat resistant in order to avoid any
damage.
• The space for air circulation, located underneath and
at the back of the hob improves its reliability by
ensuring that it will cool down, efficiently.
• For installations in the Republic of Ireland, refer to
National Regulations applicable to this product.
Choosing your installation
1. Over a unit with a door or drawer.
2. Above an oven.
Induction hob
Make sure that the air inlets through the ventilator grids
underneath the hob are never blocked.
Installing the hob over a unit with a drawer or
door
Air outlet is underneath work surface.
If necessary, remove the front crosspiece of the unit.
Suitable protection to prevent obstruction of the air inlet
to the fans must be provided.
We recommend that you
install this appliance in a
work top which is a mini-
mum 38mm deep.
The hob can be fitted into
a work top less than
38mm deep, but the
9mm gap between hob
base and appliance must
be maintained.
!! !
20