Glen Dimplex Home Appliances Ltd PBI60R - Manual (Page 11)

11
USING THE INDUCTION HOB
Keep Warm
The Keep Warm setting is found
between power setting 0 and 1.
Rotate the control knob clockwise until
the
symbol appears on the display.
Pan detection
When a zone has been activated but
no pan has been placed on the cook
zone, this means the hob only uses
power when a suitable pan is placed
on the zone, this reduces the energy
used during the cooking process, i.e.
when you take your pan off the zone
the hob automatically reduces the
power, and only switches back on
when you replace the pan.
Note If the symbol does not disap-
pear when a pan is placed on the
zone it indicates that the pan is not
suitable for induction cooking.
Get a magnet to check the pans.
Pan Sizes
Cook Zone Smallest recommend-
ed pan diameter
LHF 120 mm
LHR 145 mm
RHF 120 mm
RHR 180 mm
The safety temperature control of the
pans is only possible with quality flat
bottomed pans suitable for induction
cooking; Poor quality pans can create
air gaps between the glass and the
pan, which affects the accuracy of the
temperature con
trol.
Overheat pan protection
The hob is equipped with additional safety
systems that help to prevent cookware
from overheating, providing an additional
level of safety not available on conven-
tional hobs such as gas and ceramic hobs.
Approx Glass
Surface Temp.
degC
200 Reduces Power Boost
setting to Power Level 9
250 Reduces power to 60%
of Power Level setting
270 Switches cook zone off
300 Switches whole appliance
off
Note
Intelligent hob safety
system
Auto Stand-by (holiday shutdown)
Have you ever gone holiday & won-
dered if you have switched the hob off?
No need to worry about leaving your
hob on - with the most advanced cook-
ing system available, the hob will auto-
matically switch itself off if left unattend-
ed.