Brinkmann ProSeries 4415 - Manual (Page 26)

Top Door Pivot
25
Step 7
Screw the bottom door pivot into
the bottom right side door hole.
Then place bottom door pivot into
the hole on right side cart panel.
Align the top of the door with the
hole in the upper door hinge and
insert top door pivot, tighten
securely. Repeat for other door.
Note: When performing Step 8, lift
grill body from front and rear
panels to avoid injury to
hands and fingers.
Step 8
With the help of a friend, place grill
body assembly on assembled cart
frame. Grill body will rest on angled
top of vertical supports. Align bolt
holes located on the outside of the
grill body assembly. Secure using
four M6 X 15mm bolts. At this point,
fully tighten four bolts holding back
panel frmo Step 3 and the four
bolts holding door bracket from
Step 5.
Bottom Door Pivot