Philips TV - Manual (Page 4)

4
Remote control keys
Screen information
To display / clear the program
number and time remaining for the
sleeptimer. Press the key for 5
seconds to activate permanent
display of the number.
VCR key *
Keys not used
Pre-set sound
Used to access a series of stored
settings: Voice , Music , Theatre .
Menu
To call up or exit the menus.
Cursor / Format 16:9
These 4 keys are used to navigate
through the menus.The îÏ
keys are used to enlarge or
compress the picture vertically.
Mute
To mute or restore the sound.
Volume
To adjust the sound level
Selection of EXT socket
Press several times to select the
connected equipment.
VCR key *
Press and hold down the VCR key,
then press one of the keys to access
the main functions of the VCR:
b % ∫ H оП И¬
@
P
# · ¢ К Ж 09
The remote control is compatible with
all VCRs using the RC5 standard.
Standby
Lets you place the TV set on
standby.To turn on the TV, press
P
@ # , b , 0 to 9 .
Teletext and VCR keys
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
16:9 format
To enlarge or compress the picture
vertically
Pre-set image
Used to access a series of stored
settings:
Rich , Natural , Soft ,
Multimedia and return to Personal .
Teletext call
Number keys
Direct access to the programmes.
For a 2 digit program, enter the 2nd
digit before the dash disappears.
Teletext and VCR keys
Sound mode
Used to force programmes in
Stereo (or Nicam Stereo ) to Mono
or, for bilingual programs, to
choose between
Dual I or Dual II .
The Mono indication is red when in
forced position.
Program selection
To access the next or previous
programme.The number is
displayed for a few moments.
For some programs, the title of the
program will be displayed at the
bottom of the screen.
Teletext
Teletext call
Press the c key to call teletext, change to transparent
mode and then exit.The summary appears with a list of
items that can be accessed.
If the channel selected does not broadcast teletext, the
screen remain black.
Selecting a page
Enter the number of the page required using the
0
to
9 or @ P # keys (always 3 digits).The number is
displayed top left, the counter turns and then the page is
displayed. Repeat this operation to view another page.
If the counter continues searching, the page is not transmitted.
Direct access to the items
Coloured areas are displayed at the bottom of the
screen.The 4 coloured keys are used to access the
items or corresponding pages.
Contents
Press d to return to the contents page (usually page 100).
Temporary stop
Press
r
to temporarily disable or activate the teletext
display.
Enlarge a page
Press x several time to enlarge the page.
Stop sub-page acquisition
Certain pages contain sub-pages which follow on
automatically. Press
s
to stop / resume the sequence.
Hidden information (games solutions)
Press
y
to display or hide the concealed information.