Behringer ULTRA-VOICE DIGITAL VX2496 - Manual (Page 9)

9
ULTRA-VOICE DIGITAL VX2496
7. AUDIO CONNECTIONS
6. INTEGRATION INTO A RECORDING
SYSTEM
As mentioned at the beginning of this manual, the
ULTRA-VOICE DIGITAL is ideally suited to direct connection to a
recording medium, such as a DAT recorder, analog tape machine,
or even a hard disk recording system without the use of a mixing
console. Furthermore, an extremely clean signal is produced as
the potential noise produced by looping through a mixing console
is eliminated from the outset. You can integrate the VX2496 into
a hard disk recording system without having to use an additional
A/D converter. For such cases, the ULTRA-VOICE DIGITAL has
a 24-bit/96 kHz A/D converter with digital AES/EBU output. The
wordclock input allows the VX2496 to be locked to external
devices. Of course, you can also successfully integrate the
ULTRA-VOICE DIGITAL into your studio conventionally with a
mixing console.
7. AUDIO CONNECTIONS
The BEHRINGER ULTRA-VOICE DIGITAL VX2496 has—except
for the insert connectors—standard electronically servo-
balanced inputs and outputs. The circuit design has automatic
hum suppression with balanced signals and operates problem
free even at high levels. Externally-induced mains hum is thus
efficiently suppressed. The servo-function automatically detects
when connector pins are unbalanced and changes the nominal
level internally by 6 dB so that there is no difference in level
between input and output signals.
+
Please ensure that only qualified persons install
and operate the device. During installation and
operation the user must have sufficient electrical
contact to earth. Electrostatic discharges might
affect the operation of the unit.
Fig. 7.1: XLR connections
Fig. 7.2: 1/4" mono jack
Fig. 7.3: 1/4" stereo jack connector