Philips Sonicare Higienizador por rayos UV - Manual (Page 7)

1 Place your finger in the door recess on the
right-hand side of the sanitiser and pull open
the door.
2 Remove the drip tray.
3 To remove the protective screen, gently lift it
up (1) and pull it forward (2).
4 Snap the UV light bulb into the lamp holder.
Do not crush or break the bulb. UV light bulbs
contain a small amount of mercury.
Note: Use only the UV light bulb supplied or
a replacement UV light bulb ordered from Philips or
service centres authorised by Philips.
Note: To remove the UV light bulb, pull it out of the
lamp holder.
5 Align the pegs on the protective screen
with the slots in the reflective surface of the
sanitiser on either side of the UV light bulb.
6 Insert and gently push down the screen
to secure it in the sanitiser.
EnglisH 7
4235.020.3683.1.indd 7 02-07-09 10:00