Arkon TTSE110 User Manual

Page 2

TTSE110 | Windshield, Dashboard, & Vent Mount for TomTom Start™ & Ease™

Safety Precautions
Follow all manufacturer safety guidelines for operating your device.
Failure to practice safe usage of GPS device while driving may result
in damage, injury, or death.

Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China

Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

The Mobile Mounting Specialists™

Continued on next column...

Pinch the vent mounting clips (H) so that the teeth open
and gently insert vent pedestal into vent louvres until the
mounting clips are attached to the fi n/blade of the vent.
Adjust the support leg (I) vertically until it rests fi rmly along
the bottom of the vent or dash surface below the vent.

While holding the mounted TomTom adapter plate, gently
insert the TomTom device (not included, sold separately) into
the adapter plate until an audible click is heard.

Step 4.

Insertion of Mount Assembly into Air Vent

Step 5.

Attaching a TomTom Device to Pedestal

Attach your TomTom device (not included, sold
separately) to the dual-T head by inserting the dual-T
tabs (F) into the dual-T slots (G) on the back of the
device.

Step 2.

Step 3.

Swivel Ball Head Assembly Attachment

Attach APTTSE to Air Vent Pedestal

Slip the tightening ring (C) over the air vent mount
ball. Snap the dual-T head adapter plate (D) on to the
mounting ball (E). Screw the tightening ring over the
adapter plate until securely holding the plate. Swivel to
adjust the angle of the dual-T head.