Black & Decker AS600 - Manual (Page 6)

10 9
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Dry/Steam selector
4. Spray button
5. Surge-of-steam button
6. Comfort Grip
™ handle
7. Pivoting cord
8. Fabric guide
9. Heel rest
10. Temperature-ready indicator light
11. Fabric-select dial
12. Auto Clean
® button
13. Water tank
14. Soleplate
How to Use
This appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
FILLING WATER TANK
1. Place your thumb at the bottom center of the water-fill
cover and push up to open (A).
2. Tilt the iron and using a clean measuring cup, pour water
into opening until the water reaches the MAX level mark
on the water tank (B). Do not overfill.
3. After filling, close the water-fill cover.
4. Plug in the iron. The temperature-ready indicator light
comes on (C).
IRONING WITH STEAM
Surge of Steam
Use to remove stubborn creases.
1. With the water tank filled to the MAX mark, turn the
fabric-select dial to appropriate setting (between 4 and 6)
for your fabric (D). See fabric guide on the heel rest and
read garment’s label to help you determine fabric type.
2. Move the dry/steam selector to the desired steam
level (E).
ቢ
ባ
ቤ
ብ
ቦ
ቧ
ቨ
ቪ
ቩ
ቯ
ተ
ቫ
ቭ
ቮ
Dry
Steam/Blast of
Steam
Spray
Symbols
k
A
k
B
k
C
k
D
k
E
AS600Pub10000003185 8/1/06 4:25 PM Page 10