Quick installation, Installing your television set, Positioning the television set – Philips Flat TV User Manual

Page 7: Connecting the aerials, Switching on

Quick installation

When you turn on the TV set for the first time,
a menu is displayed on screen.This menu
prompts you to select the country and language
for the menus:

If the menu is not displayed, press the

MENU

key

to display the menu.

& Use the

keys on the remote control to

select your country and validate with

≥

If your country does not appear in the list, select
choice “. . .”

é Next select your language using the

keys

and validate with

≥

“ The search starts automatically.All the available

TV programmes and radio stations will be
stored. This operation takes a few minutes.The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press

MENU

. If no

programme is found, consult the possible solutions p. 14.

‘ If the transmitter or cable network sends the

automatic sort signal, the programs will be
numbered correctly. In this case, the installation
is complete.

( If this is not the case, you need to use the Sort

menu to number the programs correctly.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc.). In this
case, indicate your choice using the

keys and

validate with

≥

& Positioning the television set

Place your TV on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat
source (e.g. lamp, candle, radiator). Do not
obstruct the ventilation grid at the rear.

Connecting the aerials

• Insert the aerial plug into the

socket at the

rear of the set.

• Connect the power lead to the television and the

mains plug into the wall socket (220-240 V/50 Hz).
For connecting other appliances see page p.12.

“

Switching on

To switch on the set, press the

POWER

key. A

green indicator comes on and the screen lights
up. Go straight to the Quick Installation chapter.
If the TV remains in standby mode(red indicator),
press the

P -/+

key on the remote control.

The indicator will flash when you use the remote control.

Installing your television set

PROGRAM

VOLUME

5 cm

Plug’n’Play

Country

Language

English