Philips Flat TV - Manual (Page 14)

12
Connecting peripheral equipment
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
0 key.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Video recorder
DVI In DVI
Audio In
EXT 2 / SVHS2
Headphone
EXT 1 75
Ω
:
*
Source List
TV Æ
EXT 1 Æ
EXT2 / SVHS2 Æ
AV / SVHS3 Æ
PC Æ
HD Æ
The television has 2 external sockets situated at the back of the set (EXT1 and
EXT2) and sockets on the side. Press the
AV key on the remote control to display
Source List and select TV or peripheral
equipment connected to EXT1, EXT2/SVHS2, AV/SVHS3, PC or HD .
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.