Remote control keys for lcd tv functions – Philips Flat TV User Manual
Page 5
3
Remote Control Keys for LCD TV Functions
1)
.
(STANDBY)
To set the TV to standby mode.To switch the TV set on
again, press P –/+, 0 to 9 or AV keys.
2)
x
Pixel + (depending on version)
Switches the Pixel + demonstration mode on or off.
3)
· ¢ К Ж ∫
Video recorder (page 14)
4)
Q
Surround Sound
To activate / deactivate the surround sound effect. In
stereo, this gives the impression that the speakers are
further apart. For models equipped with Virtual Dolby
Surround*, you can experience Dolby Surround Pro
Logic sound effects.
5)
AV
To display Source List to select TV or peripheral
equipment connected to EXT1, EXT2/S-VHS2,
AV/S-VHS3, PC
or HD (p. 12).
6)
h
Active control
Optimizes the picture quality depending on the quality
of the incoming signal and the ambient light conditions.
7)
MENU
To call up or exit the TV menus.
8)
Cursor (
<>≤≥
)
These 4 keys are used to move around the menus.
9)
Volume
To adjust the sound level.
10)
ª m
Smart picture and sound
Used to access a series of predefined picture and sound
settings.
The
personal
position relates to settings selected from the
menus.
11)
Ë
Screen information
To display / remove the programme number, the time,
the sound mode and the time remaining on the timer.
Hold down for 5 seconds to permanently display the
programme number on the screen.
* Manufactured under license from Dolby Laboratories.“Dolby”
and the double-D symbols are trademarks of Dolby
Laboratories.
1
)
2
)
3
)
4
)
5
)
6
)
7
)
8
)
9
)
10
)
11
)