Fm mode, Using fm radio – BUSH DAB+ Digital Alarm Clock Radio with Dock for iPhone BCR33DABIP User Manual

Page 9

BUSH BCR33DABIP

FM Mode

Switch to FM mode

1. Press the MODE button to switch to FM Mode from DAB Mode.



Note: If your radio currently in AUX/iPod mode, you can shift to FM Mode by repeatedly pressing the MODE button.

Once in FM mode, it will start at the beginning of the FM frequency range
(87.50MHz), or it will play the last FM station you were listening to.

Manual Scan

1. To manually change the FM frequency, press the

button to adjust the FM frequency by 0.05MHz

per press, or press and hold

to scan backwards or upwards for the next station.

Automatically Scan

To auto-search, simply press the

button or the SCAN button



Note: a. The display will show the frequency changing until it stops on the next station.

To ‘auto-search’ more effectively, please refer to below for ‘how to conduct scan setting’.

Modify Scan Setting

By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (interference)
from weak stations.

To change the scan settings to stop only at stations with good signal strength, press MENU  < Scan setting >



„Strong stations only‟ press the

button to confirm.

Modify Audio Setting

1. By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise

ratio (hiss).

2. To play weak stations in mono, press MENU  < Audio setting >  Forced mono, press the

button to

confirm.

View Station Information

Whilst listening to your desired FM program, you can browse the station information by pressing the INFO button

repeatedly such as Radio Text, Program Type, Station Name, Audio Type (Stereo or Mono), Time and Date.

Using FM Radio