BT Diverse 2000 - Manual (Page 35)

33
To set your handset for automatic
base selection
If you are moving around, and likely to
lose contact with your base station, your
handset can be set to automatically
switch to the best available base station.
This means that if you are in an area
where the signals of two base stations
overlap, your handset will select the
strongest signal.
The handset must be switched ON.
• Press the
STO
button.
• Press the
INT
button. Display shows
the numbers of the base stations at
which the handset is registered.
• Press the
0
button to set automatic
selection.
• Press the
STO
button to confirm.
The handset will now select the base
offering the strongest signal. Display
can show the base station selected
(see previous section ‘To set/clear the
base station number display’).
If you are in an area where base station
signals overlap it is best to specify the
base station you operate through. In this
case you change automatic base
selection to manual selection (with an
automatic search default), see page 34.
STO INT 0