BT Diverse 2000 User Manual

Page 16

To register your new handset

The handset must be switched OFF.

At the base station:

• Press and hold down the

GREY

paging

button until you hear beep (after about
10 seconds).

At the handset:

• Press and hold down the

button

together with the

PWR

button, until

the display shows

1–. This tells the

base station that its base number is

• Enter the 4 digit system code.

(Standard setting

0000.)

• Press the

button. The beeps stop

after about 10 seconds, and the
display shows all the available handset
numbers.

• Select and enter one of the available

numbers. This is now the handset’s
internal number and the handset is
now registered with the base station.

You now have up to 1 minute to register
the handset, during this period the beeps
will continue.

If you experience any problems
registering your handset using these
instructions, please refer to your base
station user guide. If you still
experience difficulties, please phone
the Diverse Helpline on 0345 908070
for assistance.