Ribbing with overlock seam – Bernina ACTIVA 135 S User Manual
Page 55
Selected practical stitches: Overlock seams
54
Needle stop down
needle stays in fabric when
you stop to adjust the ribbing
2
Vari-overlock No. 3
size and type suitable for the fabric selected (see p. 57)
cotton or polyester
up (sewing position)
Overlock foot No. 2 or
Reverse pattern foot No. 1
Overlock foot No. 2 is specially designed for overlock stitches.
The pin on the foot produces more thread in each stitch so that
the elasticity of the seam is maintained.
Ribbing with overlock seam
for all fine cotton, synthetic and mixed fiber jersey
Preparation
•
fold ribbing in half
•
pin and baste to opening, right side outside
Sewing
•
sew Vari-overlock over the raw edge
•
guide the edge along the pin on the foot
Ribbing with overlock seam
Stitch:
Needle:
Thread:
Feed-dog:
Presser foot:
TIP
Back view
Front view
135_145_S_engl 14.3.2003 15:33 Uhr Seite 54
030529.52.04_0303_a135 a145_EN