beautypg.com

Inserting the bobbin, Changing the needle – Bernina ACTIVA 135 S User Manual

Page 15

background image

Setting up the sewing computer

14

Inserting the bobbin

... it lies in the T-shaped slit at
the end of the spring.
The bobbin must turn clock-
wise when thread is pulled.

Insert the bobbin
Insert the bobbin so that the
thread runs clockwise.

Pull the thread counter clock-
wise into the slot.

Pull the thread to the left
under the spring until ...

Removing the needle

raise the needle

turn power switch to «0»

lower the presser foot

loosen the needle clamp screw

pull the needle down to remove

Inserting the needle

flat side of needle to the back

insert the needle as far as it will go

tighten the needle clamp screw

Changing the needle

Refer to the safety
instruction!

135_145_S_engl 14.3.2003 15:33 Uhr Seite 14


030529.52.04_0303_a135 a145_EN