Bosch ATM/POS Bridge - Manual (Page 14)

Bosch Security Systems
ATM/POS bridge | Installation Manual EN | 8
Eng
lish
5. If the bridge is switched on, a welcome message is shown on the screen. This
message prompts you to press the F1 key (a function key on your keyboard).
6. Press the F1 key; the screen displays the System Options Menu.
7. To configure the bridge, navigate through the menus using the numeric keys on your
keyboard to select menu items.
2.2 Configuration menus
2.2.1 System options menu
The system options menu has 6 items:
1. Network Setup
2. Communication Channels
3. Terminal Setup
4. Simulation mode
5. Recording Language
6. Service Menu
Network Setup
The Network Setup submenu enables you to configure network settings and enter a
bridge name:
The MAC Address of the bridge is shown but cannot be changed.
1 Bridge Name BRIDGE-01
2 IP-Address 192.168.10.2
3 Subnet Mask 255.255.255.0
4 Default Gateway 0.0.0.0
5 Recorder TCP Port 4200 (default)
6 Service TCP Port 4201 (default)