Philips MiniVac Aspirador de mano - Manual (Page 16)

Problem Solution
Dust escapes
from the
vacuum cleaner.
The dust compartment may be full. Empty the dust
compartment.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
Perhaps the filter unit is not placed properly in the
dust compartment. Place the filter unit properly in
the dust compartment.
The vacuum
cleaner does
not work
properly when
one of the
accessories is
attached to the
nozzle.
The dust compartment may be full. Empty the dust
compartment.
The accessory may be clogged. Remove the
obstruction from the accessory.
The filter unit may be clogged. Clean the inner filter
and the outer filter (see chapter ‘Cleaning’).
The surface is
still very wet
after vacuuming
liquid (FC6142
only).
Perhaps the squeegee is not attached to the nozzle.
Attach the squeegee to the nozzle when you want
to suck up liquid.
Perhaps you do not hold the appliance in the right
way. Hold the appliance with the nozzle pointing
downwards at an angle of 30°. Do not tilt the
appliance to one side and make sure the squeegee
touches the surface to be cleaned.
English 16