Emerson Radio Barbie BLOSSOM PHONE BAR550 - Manual (Page 21)

20
TROUBLESHOOTING GUIDE
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
No Dial Tone.
Line cord not connected
correctly.
Connect line cord correctly.
Ringer switch set to OFF
position.
Slide Ringer switch to the HI or
LO position.
Line cord not connected
correctly.
Connect line cord correctly.
Phone does not
ring.
Wall jack not working. Try phone in another wall jack.
Voice level too
low.
NORM/HIGH switch set to
NORM position.
Set NORM/HIGH switch to
HIGH position.
Memory locations not set
properly.
Reprogram memory location
numbers as per this manual.
Check batteries or AC.
Unit will not
memory dial.
Loss of power/memory.
Reprogram memories.
Unit will not dial
out.
TONE/PULSE switch not
set properly.
Set TONE/PULSE switch
properly.
Loss of Power. Check batteries or AC.
Caller ID not
working
You are not subscribed to
Caller ID service.
Call your local phone company
to subscribe.
CARE AND MAINTENANCE
1. Clean your phone with a damp (never wet) cloth. Solvent
or detergent should never be used.
2. Avoid operating your unit under direct sunlight or in hot,
humid or dusty places.
3. Keep your unit away from heating appliances.