Emerson Radio Barbie BLOSSOM PHONE BAR550 - Manual (Page 16)

15
OPERATION (CONTINUED)
TO STORE
Lift the handset and press the STORE
button. The “STORE” indicator will appear
in the display.
1
Use the Key buttons (0-9) to enter the first
area code and number that you wish to
store. Remember to enter the number “1”
if necessary. The numbers will appear in
the display as you dial them.
NOTE: If you make a mistake while enter-
ing the number, hang up or press the
Hook switch to clear the display and then
start with step 1 again.
2
Verify that the number on the display is
correct, then press the STORE button
again. The Memory indicator (“MEM”) will
appear in the display.
3
Press the number “1” button to store the
displayed number in memory location 1.
Repeat steps 1 through 4 to store up to
nine additional numbers in memories “2”
through “0”
4
TO CHANGE A STORED NUMBER:
To change one of the stored numbers, simply follow the procedures in steps 1
through 4 and enter a new phone number in the desired memory. The new phone
number will be memorized and the previous phone number will be erased from
the memory.