Emerson Radio Barbie BLOSSOM PHONE BAR550 - Manual (Page 15)

14
OPERATION (CONTINUED)
USING THE TONE BUTTON
If you are in the Pulse dialing mode you may still take advantage of touch-tone
services after dialing to respond to touch-tone prompts. To do this, press the
*/TONE button to temporarily change the dialing mode from Pulse to Tone after
dialing in the Pulse mode. This will enable Pulse users to access touchtone
services. It will revert back to Pulse after hanging up.
1
CALL WAITING
If you subscribe to Call Waiting through your local phone company, and you
receive another phone call, simply press the FLASH button to answer the new
call. Press the FLASH button again to return to the original call.
1
STORING AND DIALING NUMBERS IN THE SPEED-DIAL MEMORY
This telephone has ten speed-dial memories to store up to 10 of your most fre-
quently called numbers for easy two-touch redialing. Each of the 10 memories can
store numbers of up to 16 digits. HOWEVER, ONLY THE LAST 14 DIGITS WILL
APPEAR IN THE DISPLAY.
IMPORTANT: You lift the handset from the cradle to store numbers in the memory.
After a few seconds off the cradle, you will hear the “off the hook/hang up” warning
signal from the phone company. Therefore, if you are going to store more than one
number at a time, please disconnect the line cord from the wall jack to avoid the “off
the hook/hang up” warning signal. REMEMBER TO RECONNECT THE LINE
CORD AFTER YOU FINISH STORING YOUR NUMBERS.
See page 15 for how to store numbers and page 16 for how to dial numbers in the
speed-dial memory.