Badger Basket Radix N64944-001 - Manual (Page 23)

THE BADGER ® -RADIX ® User Guide
February 2007
Page 22 of 73
status. If the reading is within the audit values, the Badger-Radix assigns a Good
Reading status.
Processing Tamper Reports
If the meter being displayed reports a tamper, the Badger-Radix will sound the special
tamper audio signal. You’ll see the tamper processing screen.
Choose one of these options by pressing the corresponding button.
• “S” (Skip) – You can skip this meter and go on to the next one. This is a handy
option if someone will come back later to troubleshoot the meter or the
transmitter.
• “M” (Manual Read) – This option allows the user to input a manual read using the
Badger-Radix keypad. This is handy if the meter is in a pit, but less helpful if the
meter is inside (unless you can access the meter).
• “T” (Trouble Code) – Using this option you can enter a trouble code to report the
status of the meter to the office. See the Trouble Code section for more details.
If you choose Trouble Code, the Badger-Radix will return to the Tamper Menu screen
once the code is entered and stored so that you can also enter a manual reading.
If you choose to enter a Manual Read, you’ll see this screen.