Beaumont Products MPEG - 4 - Manual (Page 21)

V B R I C K E T H E R N E T V S E T T O P B O X U S E R S G U I D E V E R S I O N 3 . 6 . 9
Stream Type Entries
Enter a corresponding address in the form:
NOTE: It is possible to use a hostname or numeric IP address wherever an is
called for (only if the hostname is in the DNS server).
To watch the programmed channel, use the IR remote control unit to Watch TV c and use
the left button to select.
Multicast MPEG-4
To decode multicast MPEG-4 in Local or Local-Fullscreen modes, it is necessary to put an
SDP file on the set top box. This can be done through the set top box internal FTP server.
First, obtain an SDP file for the MPEG-4 multicast stream. When streaming from
VBXcast, see the instructions on page 23 of the VBXcast Supplement Version 3.0.0
on SDP files.
Use an FTP client to place the SDP file on the set top box. A sample FTP session
to use an set top box with the IP address of 172.22.117.70 would be:
NOTE: Prompts are in bold.
Multicast MPEG-1 group:port
Multicast MPEG-2 group:port
Multicast MPEG-4 (a) See following section for information
on how to FTP the SDP file to the
SET TOP BOX
/wfs/
RTSP MPEG-1 for Video on Demand (EtherneTV VOD) /program
RTSP MPEG-2 for Video on Demand (EtherneTV VOD) /program
RTSP MPEG-4 Internet Streaming Media Alliance (ISMA) /program
C:\> ftp 172.22.117.70
User (172.22.117.70:(none)): root
331 Password required for root.
Password: admin
230 User root logged in
ftp> bin
200 Type set to I.
ftp> cd wfs
250 CWD command successful.
ftp> put vbs1d1
200 PORT command successful.
150 Opening BINARY mode data connection for
vbs1d1.
226 Transfer complete.
ftp: 739 bytes sent in 0.12 Seconds
ftp> bye
...
C:\>
C O P Y R I G H T V B R I C K S Y S T E M S P A G E 2 1 N O V E M B E R 1 0 , 2 0 0 3