Belkin Wireless G Plus MIMO Router F5D9230-4 - Manual (Page 10)

Product Overview
6
Product Features
In minutes you will be able to share your Internet connection and network
your computers. The following is a list of features that make your new Belkin
Wireless G Plus MIMO Router an ideal solution for your home or small
office network.
Works with Both PCs and Mac ® Computers
The Router supports a variety of networking environments including Mac OS ®
8.x, 9.x, X v10.x, Linux ® , Windows ® 2000, XP, Vista ® , and others. All that is
needed is an Internet browser and a network adapter that supports TCP/IP
(the standard language of the Internet).
Front-Panel LED Display
Lighted LEDs on the front of the Router indicate which functions are in
operation. You’ll know at-a-glance whether your Router is connected to
the Internet. This feature eliminates the need for advanced software and
status-monitoring procedures.
Web-Based Advanced User Interface
You can set up the Router’s advanced functions easily through your web
browser, without having to install additional software onto the computer.
There are no disks to install or keep track of and, best of all, you can make
changes and perform setup functions from any computer on the network
quickly and easily.
NAT IP Address Sharing
Your Router employs Network Address Translation (NAT) to share the single
IP address assigned to you by your Internet Service Provider while saving the
cost of adding additional IP addresses to your Internet service account.
SPI Firewall
Your Router is equipped with a firewall that will protect your network from a
wide array of common hacker attacks including IP Spoofing, Land Attack,
Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack,
TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP
defect, and fragment flooding.