Neff C57W40N3GB - Manual (Page 8)

8
Pausing operation
Press the
„ button to pause operation. Press the ƒ button to
continue the operation.
Cancelling the setting
Press and hold the
„ button for a few seconds and switch off
the main switch. Or press the „ button twice and switch off the
main switch. The setting is cancelled.
Memory
The memory gives you the option of saving your own settings
and calling them up again. You have two memory locations
available, namely "M1" and "M2". The memory is useful if you
prepare one meal particularly frequently.
In this section, you can read about
■
how to save the memory
■
how to start the memory
Saving settings in the memory
Example: use the "M1" memory location.
1. Press the main switch.
The
~ symbol lights up. Your appliance is ready for
operation.
2. Press the button for the microwave power setting you require.
The power setting lights up and a suggested cooking time is
displayed.
3. Set the cooking time using the rotary selector.
4. Press and hold the l button for a few seconds.
An audible signal sounds and "M1" appears on the clock
display for the first memory location.
You can select "M1" or "M2" using the programme selector.
5. Press and hold the l button for a few seconds.
A signal sounds. The setting is saved and can be started at any
time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Note: The programmes which have been set remain stored
even if there is a power cut.
Note: You can also store the series of operations option.
Starting the memory function
You can start cooking at any time using the settings saved for
your meal.
1. Press the main switch.
The
~ symbol lights up. Your appliance is ready for
operation.
2. Press and hold the l button for a few seconds.
3. Select "M1" or "M2" with the programme selector.
4. Press the ƒ button.
The memory function starts. The cooking time x starts
counting down.
Note: Once operation has started, you can no longer change
the memory location.
Note: Saved settings are retained even after a power cut.
The cooking time has elapsed.
A signal sounds. The memory function has finished. You can
stop the audible signal by pressing the ÁÀ button. Press
the „ button and switch off the appliance at the main switch or
make new settings.
Pausing
Press the
„ button or open the appliance door. Operation is
suspended. After closing the door, press the ƒ button again.
Operation will then continue.
Cancelling the setting
Press the
„ button twice or open the appliance door and
press the „ button once.
Electronic clock
Your appliance has various clock functions.
In this section, the following are explained:
■
The clock display
■
how to set the timer
■
how your appliance is automatically switched off (cooking
time)
■
how to set or change the clock.
Clock display
Clock function Use
Q Timer You can use the timer as an egg timer or
a kitchen timer. The appliance does not
switch on or off automatically
&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU