Sharp UP-X200 - Manual (Page 44)

42
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus meets the requirements of the Canadian Interference-Causing
Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du
Reglement sur le Matériel Brouilleur du Canada.
Warning
• The WLAN card has been tested and found to comply with the Federal Communications
Commission(FCC) guidelines on radio frequency energy (RF) exposures.
• This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
European Economic Area (EEA)
RLAN's (2.4GHz) for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz
• France outside, the equipment is to be restricted to power of less than 10mW, about 2.454 - 2.4835
GHz frequency range.
• Belgium outside, the equipment is not restricted to 2.460 - 2.4835 GHz frequency range.
• Italy requires a user license for outside usage.
Statement of Compliance
Symbol Technologies, Inc., hereby, declares that the radio card is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of
Conformity may be obtained from http://www2.symbol.com/doc/
Declaration of Conformity
We, Symbol Technologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA declare under
our sole responsibility that the product
Spectrum24HR, LA-4137, 11 Mbps Type I Radio Card
To which this product relates, is in conformity with the following standards and/or other normative
documents.
EN 300 328 v1.1.1 (2000-07) Radio; 2.4GHz Spread Spectrum
EN 301 489-1 v1.2.1 (7-2000) Part 1: EMC, Common technical requirement
EN 301 489-17 v1.1.1 (9-2000) Part 17: Specific conditions for wide-band data
EN 60950: 1992 Uncl. 1-4, 11: Safety of information Technology Equipment
We hereby declare that all essential radio test suites have been carried out and that the above named
product is in conformity to all essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10(5) and detailed in Annex IV of Directive
1999/5/EC has been followed with the involvement of the following Notified Body (ies):
BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ.
Identification Mark: 0168
The equipment also carries the Class 2 equipment identifier
The technical documentation relevant to the above equipment can be made available
for inspection on application to:
Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UK
Alan Parrish Senior Director, Regulatory 6 August 2001
(name) (title) (signature of authorised person) (date)
The Regulation of Radio LAN card Type:LA-4137 is as the following.
UPX200_ENDpage 04.7.15, 2:45 PM 42